Types of hand and machine weaving of gold chains around the neck
Using stamping, craftsmen make such types of gold chains as, for example, anchor and “Love”. These chains are made from specially prepared links - stamps. The parts are not soldered together, but threaded into each other. Such jewelry is not very durable, gets very twisted and is easily deformed.
The manual type of work is characterized by the production of the most expensive types of weaving gold chains for women and men. It takes a lot of time to produce one piece of jewelry, because the craftsman does without any automatic tools throughout the entire process. The weight of such products is at least 6 g. It is for twisting “Bismarck” and “Fox Tail” - it is also called “Byzantine” - that handmade jewelers are used.
The most common type of making patterns in gold chains is considered to be machine making. From the name it immediately becomes clear that the product is produced using automated equipment. In such cases, craftsmen can work with very small links - up to 0.2 mm. Machine weaving of gold neck chains is much cheaper than hand weaving. Varieties of weaving “Nonna” and “Double Anchor” are produced using machine technology.
It is customary to distinguish three main technologies for twisting chains: “Bismarck”, “Anchor” and “Pantsirnaya”. However, over the years, these varieties have received many variations. Now there are about 50 types of them: from the simplest to chains with intricate links. The names of weaving chains made of gold are very unusual, but this does not make the jewelry look any less attractive.
Weaving women's gold chains in the Bismarck style (with photo)
Bismarck weaving in gold chains is the most popular and most widespread. According to established opinion, this type of pattern is considered characteristic of men's products. But depending on the thickness of the links used, this type of knitting may also be suitable for the fair sex.
Please note that in the photo of the Bismarck weave in the gold chain one peculiar feature is noticeable: the links are connected in different directions.
Some sources say that Vitje earned its name thanks to the German Chancellor Otto von Bismarck. Therefore, this variety, like the great figure of the German Empire, is sometimes also called “Kaiser” or “Cardinal”.
It turns out that several hundred years before Otto von Bismarck, this weaving was considered exclusively for women, and the chains that were made in this style seemed extremely fragile and were long. However, due to its exceptional strength, after some time men's chains began to be decorated with this pattern.
Cardinal weaving in gold chains, as in the photo, can be either simple or complex and consist of two, three or four layers of links. The length of such decorations is always at least 50 cm.
In addition to the fact that “Bismarck” is one of the strongest types of mating, it is considered one of the most complex and labor-intensive. Naturally, such a pattern is made only by hand. The principle of operation is that the links are connected in a truly imaginative way! And the elements of the pattern themselves consist of rings that are directed in different directions.
You can see this striking feature in the photo of a women's gold chain with Bismarck weave:
A chain made in the Bismarck style will give its owner an aristocratic look. Depending on the wishes of the buyer, the weight of such a product may vary.
How to make a chain
The gold used for the accessory in question is pre-drawn into wire. Depending on the massiveness, a thread with a thickness of 0.35 to 0.6 millimeters is used. This is the diameter that is considered optimal for snail weaving.
Jewelry can be created either using a machine or completely by hand. Machine manufacturing is now one hundred percent automated, that is, a person only observes the process and controls the quality of the finished product. Modern technologies, by the way, make it possible to produce strong links from wire with a thickness of 0.2 millimeters. The product assembled from them, of course, will not be particularly resistant to mechanical damage, but with proper handling it will last for decades.
However, even modern equipment is not always able to cope with some types of weaving - here the work has to be done by highly qualified specialists called “chain weavers”. This, in turn, leads to a significant increase in the price of jewelry. In addition, hand-made accessories always have a fairly large mass. The minimum value is 6 grams.
The production of chains is truly jewelry work. The process of their creation is divided into several stages:
• initially the wire of the required diameter is drawn out; • then it is carefully wound onto a special template base; • the resulting spiral is carefully cut into individual elements; • then they are fastened together (each link of the “Snail” consists of two parts); • at the next stage the chain is soldered; • the almost finished product is additionally rolled with a roller to flatten it; • after all this the decoration is ground and polished.
Some factories produce chains by stamping - here the links are attached without cutting, so accessories of this kind are even more reliable.
Varieties of weaving gold chains: “Python”, “Cardinal”, “Italian” and others (with photo)
What types of weaving gold chains in the Bismarck style exist in nature?
“Royal Bismarck” will amaze any connoisseur of true beauty with its exquisite shape. The ornate way of weaving will look great on the necks of a respectable gentleman or a sophisticated lady.
“Arab Bismarck” will inspire those who see it with oriental motifs: the pattern resembles the ligature of the Arabic alphabet.
“Flat” is a classic version of the pattern in which the links have a double curl in a spiral.
“Python” (“Cardinal”, “Italian”, “Kaiser”) got its name due to the volume and thickness of the links.
Python weaving in a gold chain is a slightly more complicated version of Bismarck weaving. The main advantage of this type of jewelry is that it looks more feminine and has a unique shine when in motion.
But do not forget that products with this name - “Python” weaving in gold chains in the photo can be seen in more detail - have a number of specific characteristics:
- Such decorations are still quite massive;
- It is quite difficult to match them with another piece of jewelry - a pendant or pendant;
- Python chains are often very heavy.
A gold chain with “Italian” weave – another name for “Python” – is easier to imagine on the neck of an older woman than on the chest of a fragile, young girl. Such a thing looks very respectable and without further ado speaks of the high status and position in society of its owner or owner. There is a tendency that men buy this product more often than women, since a chain with a similar pattern looks quite impressive in combination with almost any clothing.
Representatives of the fair sex wear beautiful gold chains with Italian weave under magnificent evening dresses: stylists vying with each other to say that this jewelry is an excellent addition to a long dress.
Due to their heavy weight, gold chains with “Cardinal” weave – this is also the name for the “Python” pattern – are equipped with a reliable lock, which is another advantage of these jewelry.
It should be noted that the links in such products are not deformed, since they fit very tightly to each other. In addition, if the jewelry is made by hand by a master jeweler, then the weight of the chain will reach at least 6 g.
If you take a closer look at the photo of gold chains with Italian weave, you can once again be convinced that they cannot be correlated by gender:
Since jewelry is produced in any length and thickness, it will therefore easily become an excellent gift for a close friend or a serious business partner.
And if you manage to find a thin gold chain for women with “Cardinal” weave, then it will fit perfectly with a cross or amulet, which are hidden under clothing so that it is not visible to prying eyes.
Chains made of yellow and white gold with “Anchor” weaving (with photo)
Gold chains with “Anchor” weaving use the simplest technology for fastening links. In such products, one link is located perpendicular to the other. This pattern's structure resembles a real ship's chain.
Jewelry made in a classic style has an oval shape of link rings. But products with elongated parts are also very popular.
Look at an example of elongated links in a gold chain with “Anchor” weaving in the photo:
Products made of white and yellow gold with a similar pattern can be made using stamping, machine knitting or manually. A master jeweler does not need to put a lot of effort into making a piece of jewelry. But for handmade chains the price is much higher than for those products that are made by machine or stamping. The last two technologies are not an indication that the chain will look or wear worse than handcrafted items.
It is “anchor” chains, like jewelry in the Bismarck style, that are considered to be one of the most durable and unpretentious. The items are very easy to care for: they are not difficult to wash, since the jewelry does not consist of intricately woven links.
But there is one nuance: when choosing a chain with such a twist, you need to carefully examine its lock. At first glance, it should not raise any doubts in the buyer. You need to make sure that the fastening mechanism is strong enough.
“Anchor” knitting is universal: it is suitable for both men and women. Who will wear the chain depends on its length and thickness.
The big advantage of such jewelry is that they go well with other jewelry. This is very important because many people are used to wearing gold chains with rings, bracelets or pendants. Due to its external simplicity, chains with an “Anchor” pattern look great with a variety of pendants. You just need to pay attention to the size of the pendants so that they visually match the thickness of the chain itself.
Very often, godparents give chains made in silver or white gold with “Anchor” weaving to their wards before the baptism ceremony.
Selecting the suspension
For the vast majority of people, gold chains serve as everyday decoration, so they are no longer treated as a separate accessory, and this is a big mistake. Even for a completely neutral product, it is necessary to select other jewelry correctly.
So, in particular, pendants should only be used that correspond to the size of the chain and its weight. The optimal formula is that the pendant should weigh half as much. It is important that the color of the metal is identical for both items. Remember, a heavy pendant on a thin chain looks simply ridiculous (and it often causes the base to break).
Gold chains with “Armor” weaving: photos and names
This technology has become the basis for the creation of many varieties of decorative curling. Its peculiarity lies in the fact that the flat links, which are polished on both sides, are connected not in a perpendicular plane, but as if in the same plane.
It is precisely due to its high strength that the technology received the name “Armor”. And also because this type of knitting has a striking resemblance to chain mail links.
This method of chain mail armor is very common when making neck jewelry. Unlike products in the “Anchor” style, gold chains with “Armor” weaving have a beautiful smooth surface, which creates the feeling that the links form a single whole.
Nowadays, there are a great many varieties of “Armor” knitting.
Photos with the names of weaving chains made of gold can be examined in detail by looking below:
“Nonna” is a type of knitting in which both sides of the jewelry are processed using a diamond edge. Such jewelry sparkles magnificently in the sun. From Italian the name of this knitting is translated as “Grandma’s weave”: equally durable, beautiful and smooth.
“Figaro” or, as it is commonly called, “Cartier” - in connection with the use of jewelry in this style by the world famous fashion house - is distinguished by patterns of links of various shapes and sizes.
The "Armor Parallel" knitting uses two round links woven together.
“Love” – resembles hearts fastened together. These products are literally weightless - very light and airy.
“Snail” (“Clip”) – the pattern in this type of twisting resembles a snail shell. And all because the links are spirally connected to each other.
“Byzantine” - links connected in a fantasy pattern add sophistication and grandeur to the decoration. This type of weaving is considered especially durable and reliable.
“Rhombus” (“Rhombo”) - this twist got its name because of the diamond-shaped shape of the links. The knitting consists of rings connected in series, polished on both sides and located in a single plane.
Solid and hollow chains
Regardless of the weaving style, all produced chains are divided into solid and hollow. The latter look very voluminous, but at the same time retain lightness. The specificity is that they are made not from wire, but from a gold tube of suitable diameter. That is why, despite its external massiveness, the chain has a very small mass and, accordingly, an acceptable price.
As a rule, hollow products are decorative, complex weaving. They are more suitable for well-established middle-aged people. Such chains give a solid appearance, but do not require very large expenses.
Solid products are many times heavier. Massive jewelry is often difficult to wear around the neck. In addition, they are much more expensive. But they have a number of significant advantages:
• reliability; • resistance to mechanical stress; • durability.
You can wear monolithic chains every day without fear for their integrity. Moreover, any damage can be repaired quite easily even by a less experienced technician.
Elegant gold chains with Nonna weaving and their photos
Gold chains with “Nonna” weaving are considered the most elegant among products with “Armor” knitting. The diamond cut, a method of processing jewelry, gives this type of weaving a shimmering shine in the light.
Even if at first glance it seems that the chains in this unusual style are too fragile, there is no need to be afraid that they will become deformed.
The photo of a gold chain with Nonna weaving shows that the fastening of the links is quite strong and reliable:
The name "Maglia della Nonna" is translated from Italian as "grandmother's weaving". This type of Vitya earned this name due to its external sophistication and extraordinary grace.
This fashionable weaving in gold chains is typical for women's jewelry. But if large links are used in the manufacture of the product, then such a piece of jewelry will easily suit representatives of the stronger half of humanity.
What length to choose a chain
The length of the decoration is an important point that I would like to dwell on separately. This parameter greatly influences the cost; in addition, when choosing, the following factors must be taken into account:
• your usual lifestyle; • body features; • compatibility with existing decorations.
The jewelry trade offers a standard set of chain lengths. The minimum is 40 centimeters, and the maximum is 70. Some manufacturers can assemble individual jewelry to order, but its cost will increase quite significantly.
For ladies who prefer closed tops or business blouses with a turn-down collar, a chain 40 cm long is suitable. It will gracefully wrap around the neck and will unobtrusively peek out through the neck slits.
For those who like dresses with a not too deep neckline, jewelry from 50 to 60 centimeters is equally suitable. They look good over a closed dress. Products 70 cm long should not be worn by women with large breasts, as they will always slide into the cleavage.
In general, stylists believe that the optimal length of a woman’s chain is 50 cm. Representatives of the stronger sex can safely wear longer jewelry.
Women's gold chains with Cartier weave
The “Nonna” twist is not inferior in its beauty to the “Cartier” variety of “Armor” knitting. Otherwise, this type of twist is also called “Figaro”. Weaving has earned such a “talking” name because of its, so to speak, “inconsistency”: the products combine links of various shapes and sizes. This “changeable disposition” of Vitya is very reminiscent of the character of the main character of the play by the French playwright Pierre de Beaumarchais.
In Cartier weaving gold chains, oval or round links are connected to each other in a single plane. The classic formula of this knitting is as follows: 3 round links alternate with 1 oblong ring.
Figaro chains have become extremely popular due to their frequent use by the fashion house Cartier, which is why this type of chaining is also known as Cartier.
Jewelry in the Figaro style looks great in absolutely any length. In addition, women's gold chains with this type of weaving go well with pendants and pendants.
Women's gold chains with "Love" weaving (with photo)
“Love” chains are an ideal gift for a loved one
You can guess that gold chains with “Love” weaving deserve their name because of the very romantic shape of the links. Rings that resemble fastened hearts look elegant on the necks of young girls.
This sophisticated twist is made of round, even loops. The edges of the links touch each other.
Jewelry of this type is a wonderful gift option for the fair sex. After all, chains with Love twists are used to wear exquisite pendants and pendants under evening or cocktail dresses.
Looking at the photo of a gold chain with “Lav” weaving, you can see that, thanks to the ease of weaving, you can wear several items at the same time:
In this case, the “airiness effect” will be even more noticeable.
Gold chains with Byzantine weaving
To make massive gold chains, the Fox Tail twist is most often used. With the help of this knitting, links of the same size and shape are connected in a fantasy plexus. It is this type of fastening that allows you to give the product a unique shine in the sun.
The photo of a gold chain with “Byzantine” weaving shows that this jewelry is particularly durable and dense, regal in beauty and sophistication.
Products in the Fox Tail style are more common among men. Chains with this knit look great in any gold color, so you can wear them with whatever outfit you want.
If a representative of the female half of humanity wants to buy herself a piece of jewelry with a “Byzantine” twist, then it is better for her to opt for its “Spikelet” variety.
This knitting is very similar to the “Fox Tail”, but in the pattern of such products the links point in one direction.
This type of weaving of gold chains, as in the photo, looks like a spike of wheat:
By the way, jewelry with this pattern is very popular in Great Britain.
In addition, products in the Spikelet style are very durable and can be worn daily. It takes a lot of effort to confuse such a chain!
Gold chains with “Rhombus”, “Double Diamond” and “Triple Diamond” weaving
Exquisite gold chains with “Rhombus” weaving, endowed with an original appearance, are very popular among connoisseurs of classical beauty. The peculiarity of these jewelry lies in the links, which, as you might have guessed, have a special diamond shape.
In some cases, the pattern rings are diamond cut, which gives the product a shimmering effect.
It is generally accepted that the “Rhombus” weave is predominantly a man’s weave. But technology does not stand still, so in our time more elegant chains of such knitting are being created that have already appealed to thousands of women.
Depending on how many links are fastened together, the pattern can be single, double (see the photo for an example of a gold chain with “Double Diamond” weaving) or triple:
Weaving from rings located inside each other visually gives the jewelry volume.
We will deliver free of charge to any city in Russia
It is profitable to order a Cobra weaving chain from us. We not only have our own production, providing fair and transparent manufacturing prices. The studio successfully cooperates with services that provide courier and logistics services in Moscow and any city in Russia. Shipping on each chain is completely free and will be delivered personally to the location you specify!
Reliable and very high quality manufacturing; prompt and convenient delivery directly to your hands, quality guarantee confirmed by a certificate and fair prices without additional or hidden fees.
Make a custom-made “Cobra” chain in our workshop!
Which gold chain weave is the strongest?
Today the pace of life is so crazy that it is simply necessary to know which weave of gold chains is the most durable!
The first place in the reliability rating is deservedly occupied by the Bismarck knitting. When other jewelry is torn and lost, this powerful giant will withstand the onslaught of daily hassle with dignity.
“Anchor” twisting, which is so popular in the manufacture of modern precious items, confidently occupied the second position . If you can find a chain with a double row of links, then no sea or land winds will be afraid of it.
The third place was won by the “Shell” knitting. All connoisseurs of comfortable and practical things, as well as adherents of the classics, will definitely like jewelry in this style.
Already familiar to many, “Fox Tail” took fourth place in the ranking. The male half of humanity needs to take a closer look at this option.
In the fifth position are gold chains with “Triplet” weaving, as in the photo. In appearance, they resemble a rope twisted into a bundle.
Types of weaving
The quality and durability of the chain depends on the type of weaving. Traditionally, there are five options:
1. Anchor. The links are connected at right angles, the weaving itself resembles an anchor chain in appearance. 2. Armored. The most durable, in which all links lie in the same plane. 3. Bismarck. It is often done by hand and is the most complex weaving, sometimes double, triple and even quadruple. 4. Fantasy. It combines various types of weaving, shades of metals, is distinguished by its multi-layer nature and the presence of decorative links. 5. Twisted.
The first three weaves are basic; in total, today there are more than 50 types of weaves of varying complexity and configuration of links.
